Pag. 43 of 52
- Programming menu
11.98 M+3 -
Last measured flow rate displaying
In this menu it’s possible to display the last measured instantaneous flow
rate value.
11.99 M+4 - DIMPU on/off times number displaying
In this menu it’s possible to see how many times the unit
DIMPU
has
been switched on and off .
11.100 M+5 - Calculator and Converter
In this menu it’s possible to use the scientific calculator or the PT100
temperature converter.
Press
to use the
calculator
.
Enter number: with
to change the digit and
to move the cursor to the
right (max. 13 digits). Press
to confirm
Select the operation with
or
and press
to confirm (in the example
shown next, the “
PT100<>Temperature
” function).
Available operations: +; -; x; /; 1/x; abs (x); x*x; sqrt (x); exp (x); ln (x); log
(x); power(x,y); sin (x); cos (x); arcsin (x); arccos (x); arctan (x); Store in M
(x=>M); Read M (x<=M); Add to M; Move x to y; PT100<>Temperature
The display now shows the selected operation result: 25.684°C
11.101 M+6 - Velocity threshold programming
In this menu it’s possible to set the maximum speed threshold to generate
an alarm on the relay or on OCT.
11.102 M+7 - Monthly totalizer displaying
In this menu it’s possible to display the monthly totalizer.
11.103 M+8 - Annual totalizer displaying
In this menu it’s possible to display the annual totalizer.
11.103 M+9 -
Echo absence error total time displaying (*H)
In this menu it’s possible to display the echo absence error condition total
time.
