Pag. 25 of 52
- Configuration
10.2.15 - How to use acoustic alarms (Buzzer)
The Integrated Buzzer is user settable. Can be used as an alarm.
M77
for setting.
10.2.16 -
How to use the OCT output (Open Collector)
The OCT output is user settable via
M78
.
Make sure that the frequency or pulse output supports the OCT.
10.2.17 -
How to change the internal calendar
If it is necessary to change the calendar, use
M60
.
10.2.18 -
How to adjust the LCD contrast
Use
M71
. The change will be saved in EEPROM.
10.2.19 -
How to set the RS485 serial interface
Use
M62
for setting.
10.2.20 -
How to display the partial totalizers
Use
M82
to display the partial totalizer (daily, monthly or yearly).
10.2.21 -
How to use the manual totalizer
Use
M38
, then press
to start and stop the totalizer.
10.2.22 -
How to check the ESN and other minor details
The ESN is an 8-digit code that identifies the product, the version and the manufacture date.
The user can use the ESN also for the instrumentation management.
Can be found in
M61
.
Other details of the instrument are the total working time (displayed in
M+1
) and the turn-on time
(displayed in
M+4
).
