Pag. 37 of 52
- Programming menu
11.62
M62 - Serial port configuration programming
In this menu it’s possible to set the serial port configuration.
The default settings are:
Baudrate
9600
Parity
None
Data Bits
8
Stop Bits
1
11.63 M63 - Communication protocol programming
In this menu it’s possible to set the communication protocol mode.
Default setting: MODBUS RTU Only
Available settings:
MODBUS RTU Only
MODBUS ASCII+ TDS7
11.64 M64 - AL3 analog input programming
In this menu it’s possible to set the AL3 analog input beginning and full scale.
11.65 M65 - AL4 analog input programming
In this menu it’s possible to set the AL4 analog input beginning and full scale.
11.66 M66 - AL5 analog input programming
In this menu it’s possible to set the AL5 analog input beginning and full scale.
11.67 M67 - Frequency output range programming
In this menu it’s possible to set the OCT output range when it set as a
frequency output proportional to the measured instantaneous flow rate.
11.68
M68 - Frequency output low flow rate programming
In this menu it’s possible to set the frequency output low flow rate.
11.69
M69 - Frequency output high flow rate programming
In this menu it’s possible to set the frequency output high flow rate.
11.70 M70 - Backlight interval programming
In this menu it’s possible to set the display backlight time.
Range: 0÷60000 seconds
