Pag. 32 of 52
11.34 M34 - Net totalizer activation programming
The display shows the previous setting.
To activate the net totalizer, between the forward totalizer and reverse
totalizer, need to set “ON”
Available settings: ON; OFF
- Programming menu
11.35
M35 - Forward totalizer activation programming
The display shows the previous setting.
To activate the forward totalizer need to set “ON”
Available settings: ON; OFF
11.36 M36 - Reverse totalizer activation programming
The display shows the previous setting.
To activate the forward totalizer need to set “ON”
Available settings: ON; OFF
11.37 M37 - Totalizers reset
To avoid unwanted reset, the reset confirmation in 2 distinct sub-menu is
needed. It is also possible to reset all totalizer or single totalizer.
To reset, proceed as follows: press
Select with
or
“
YES
” and press
Selecting “
NO
” the reset procedure is canceled .
Default value: NO
Select with
or
the required option and press
, the confirmation
message will appear after the reset. Selecting “
NONE
” the reset procedure
is canceled. Default value: NESSUNO
Available settings:
None
All;
NET Totalizer
POS Totalizer
NEG Totalizer
Energy NET Total
Energy POS Total
Energy NEG Total
Master Erase
Net Flow Today
Monthly Totalizer
Yearly Totalizer
11.38 M38 - Partial totalizer
In this menu a partial totalizer with manual start and stop is available. To
start the partial totalization press
Pressing
will stop the totalization. Further pressing
will reset and
restart the partial totalizer.
Press
or
to exit.
