www.dfi.com
75
Chapter 10 Intel AMT Settings
Chapter 6
Chapter 10
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
[
↑↓
] = Move Highlight [Enter] = Select Entry [Esc]= Exit
TCP/ IP SETTINGS
> Wired LAN IPV4 Configuration
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
WIRED LAN IPV4 CONFIGURATION
DHCP Mode
<Enabled>
Disabled
Enabled
[
↑↓
] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1205
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
INTEL (R) AMT CONFIGURATION
Manageability Feature Selection
< Enabled>
>
SOL/Storage Redirection/KVM
> User Consent
Password Policy <During Setup And
Configuration>
>
Network Setup
Activate Network Access
<Full Unprovision>
Unconfigure Network Access
> Remote Setup And Configuration
> Power Control
[
↑↓
] = Move Highlight [Enter] = Complete Entry [Esc]= Discard Changes
Full Unprovision
Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1197
Copyright(C) 2003-15 Intel Corporation. All Rights Reserved.
INTEL (R) AMT CONFIGURATION
[
↑↓
] = Move Highlight [Enter] = Select Entry [Esc]= Exit
Manageability Feature Selection
< Enabled>
>
SOL/Storage Redirection/KVM
> User Consent
Password Policy <Anytime>
>
Network Setup
Activate Network Access
Unconfigure Network Access
<Full Unprovision>
> Remote Setup And Configuration
> Power Control
Activates the current network settings
and opens the ME network interface
Continue: (Y/N)
26. Select Previous Menu until you return to the “Intel(R) ME Network Setup”
menu. Select
“TCP/IP Settings”
and
then press “Enter”.
27. In the “TCP/IP Settings” menu, select “Wired LAN IPV4 Configuration”
and
then press
“Enter”.
28. In the “Intel(R) AMT Configuration” menu, select “Activate Network Access” and then
select “Yes/No” and press “Enter”.
29. In the “Intel(R) AMT Configuration” menu, select “Unconfigure Network Access” and then
press “Enter”.
