www.dfi.com
Chapter 4 BIOS Setup
35
Chapter 7
ACPI Settings
This section configures the ACPI settings.
Wake on LAN
Enable the system to be waken up via the onboard LAN.
State After G3
Specify which state the system should be in when the power is re-applied after a power
failure (G3 state, the mechanical-off state).
S0 State
Power on the system when power is re-applied after a AC power loss.
S5 State
The system appears to be off when power is re-applied after AC power loss.
Wake on RTC
Automatically power the system on at a particular time every day from the Real-time clock
battery. Specify the wake up time of the day below: <hour> (00~23), <minute> (00~59),
<second> (00~59).
CPU Configuration
This section configures the CPU.
Intel
®
SpeedStep™
Enable or disable the Enhanced Intel
SpeedStep
®
Technology (EIST). The EIST helps
optimize the balance between system’s power consumption and performance.
Turbo Mode
Enable or disable processor turbo mode (requires that EMTTM is enabled too), which
allows the processor core to automatically run faster than the base frequency when
the processor’s power, temperature, and specification are within the limits of TDP.
