Develop ineo+35 Скачать руководство пользователя

Страница: 342 / 368

Status, error and service messages

13-40

Operator messages

[The USB device is
invalid.]

[Disconnect USB device.]

An incompatible USB
device is connected to
the USB HOST port.

Disconnect the USB
device from the USB
HOST port.

[IEEE802.1x Auth. failed]

[Please reboot.]

IEEE 802.1X port
authentication timed
out.

Turn the machine off,
then on again.

[IEEE802.1x
Authenticating]

[Please wait.]

IEEE 802.1X port
authentication is being
performed.

If authentication is suc-
cessful, the message is
cleared.

If authentication times
out, turn the machine
off, then on again.

Message

Cause

Solution

[Configuration of Options
Changed]

[Power Off and ON.]

An optional lower
feeder unit was
installed or removed
while the machine is
on.

Turn the machine off,
wait a few seconds, and
then it on again.

[Cover Open]

[Cover is open.]

[Close all covers properly.]

The cover is open.

Close the indicated
cover.

[Misfeed Detected]

[Misfeed was detected.]

[Remove the paper.]

A media misfeed
occurred.

Open the indicated
cover, and remove the
misfed media.

[Imaging Unit Missing]

[Install imaging unit and
close all doors.]

No imaging unit is
installed. Otherwise,
an imaging unit
incompatible with the
machine has been
installed.

Install the correct imag-
ing unit.

Message

Cause

Solution

Содержание ineo+35

















































































































































































































































































































































































Результаты поиска

Содержание ineo+35

Отзывы:

Похожие инструкции для ineo+35

Бренды по названию

Популярные бренды

Develop ineo+35, Руководство пользователя

Результаты поиска

Содержание ineo+35

Отзывы:

Похожие инструкции для ineo+35

Бренды по названию

Популярные бренды