Develop ineo+35, Руководство пользователя

Страница: 329 / 368

Solving Other Problems 13-27
Printing from
a USB mem-
ory device is
not possible. [Memory Direct Print]
is set to [Disable]. Press the [Utility/Counter] key, and
then set [Admin Settings] - [Memory
Direct Print] to [Enable].
The file format (file
extension) is not one
that can be printed. Only files with the format (extension)
for JPEG, TIFF, XPS or PDF can be
printed.
Press [USB/HDD], and then, with
[Memory Direct] - [File Type], select
the type of files to be displayed.
A public user is not
specified for user
authentication. Contact the administrator of this unit.
Printing
takes too
much time. The machine is set to
a slow printing mode
(for example, thick
stock). It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The machine is set to
power saving mode. It takes time for printing to start in
power saving mode.
The job is very com-
plex. Wait. No action needed.
A toner cartridge for a
different region or an
unapproved toner
cartridge is installed
([Incorrect toner car-
tridge]is displayed in
the message win-
dow). Install a correct toner cartridge
approved for your specific machine.
If an error has been
detected during print-
ing job transmission
in the Copy mode, it
takes a while to pro-
cess the error and
resume the printing
operation. Wait. No action needed.
Blank pages
are printed. One or more of the
toner cartridges are
defective or empty. Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
The wrong media is
being used. Check that the media type.
Symptom Cause Solution