Develop ineo+35, Руководство пользователя

Страница: 243 / 368

Specifying destinations 10-31
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to “[Security
Settings]” on page 3-69.
"
With a Web Service transmission, only one destination can be speci-
fied.
"
With WSD scanning on Windows 7/Vista/Server 2008, it may not be
possible to specify a resolution or document size.
Selecting from the log
A destination can be selected from the log of the last five transmissions.
1
In the initial Scan to Folder mode screen, press [Log].
2
Select the destination from the list, and then press the [Start] key.
"
Only one destination can be selected from the log.
"
The only destinations that appear in the log are those specified after
pressing [Direct Input].
In addition, destinations specified with broadcast transmissions do not
appear in the log.
Selecting a program destination
Data can be sent with a program destination previously registered on the
machine.
Program destinations are registered with destinations where data is fre-
quently sent together with scan settings allowing data to easily be sent with-
out the trouble of specifying the various settings.
"
In order to select a program destination, the program destination must
first be registered on the machine. For details, refer to “Registering a
program destination” on page 10-35.
1
Press [Scan to Folder] to display the initial Scan to Folder mode screen.
2
Position the document to be scanned.
– For details on loading the original document, refer to “Loading a Docu-
ment” on page 4-36.
3
Press the [Mode Memory] key.
4
Select the desired program destination from the list, and then press [OK].
The settings and destination addresses are recalled.
"
Only one program destination can be selected.