Develop D 2500iD, Руководство по обслуживанию

Страница: 31 / 232

FrameMaker Ver.5.5E(PC) Di250 GENERAL, MECHANICAL/ELECTRICAL
99.01.14
M-6
OFF
D The Start key is pressed.
Polygon Motor
ON
Fusing Cooling Fan Motor
ON
ON
Laser
Approx. 6 sec.
ON
Developing bias (DC)
Approx.
100 msec. ON
Image transfer output: - voltage
ON
Image transfer current
value for non-printing
timing between sheets of
paper
Approx.
1.1 sec.
ON
I/C Motor
Approx.
140 msec.
ON
Main Motor
The Power Unit Cooling Fan Motor turns at full
speed.
The Ozone Fan Motor turns at full speed.
Approx.
700 msec.
ON
Paper Take-Up Solenoid
E The Synchronizing Roller Sensor is activated.
Approx.
110 msec. OFF
Paper Take-Up Solenoid
VSYNC signal ON:
approx. 50 msec. later ON
Paper Take-Up Solenoid
Developing bias (AC)
Synchronizing Clutch
ON
ON
OFF
Paper Take-Up
Solenoid
Approx.
90 msec.
Approx.
160 msec.
ON
Image transfer current value for printing
F The Synchronizing Roller Sensor is deactivated.
Approx.
130 msec. OFF
Synchronizing Clutch
Approx.
170 msec. OFF
Developing bias (AC)
Approx.
320 msec.
ON
Image transfer output: - voltage
I/C Motor
Approx.
650 msec.
Approx.
15 min. OFF
Developing bias (DC)
OFF
Laser