Develop D 2500iD, Руководство по обслуживанию

Страница: 10 / 232

FrameMaker Ver.5.5E(PC) Di250 GENERAL, MECHANICAL/ELECTRICAL
99.01.14
G-1
1170SBG0100A
Laser Safety
This is a digital machine which prints by means of a laser. There is no possibility of danger
from the laser, provided the machine is operated according to the instructions in this
manual.
Since radiation emitted by the laser is completely confined within protective housing, the
laser beam cannot escape from the machine during any phase of user operation.
This machine is certified as a Class 1 product. This means the machine does not produce
hazardous laser radiation.
Internal Laser Radiation
Maximum Average Radiation Power: 36.7
µ
W at laser aperture of the print head unit
Wavelength: 770-810nm
This product employs a Class III b Laser Diode that emits an invisible laser beam.
The Laser Diode and Scanning Polygon Mirror are incorporated in the print head unit.
The print head unit is NOT A FIELD SERVICE ITEM.
Therefore, the print head unit should not be opened under any circumstances.
For United States
CDRH regulation
This copier is certified as a Class 1 Laser product under the Radiation Performance
Standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory
for Laser products marketed in the United States and is reported to the Center for Devices
and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S.
Department of Health and Human Services (DHHS). This means that the device does not
produce hazardous laser radiation.
1 SAFETY INFORMATION
CAUTION: The use of controls, adjustments or performance of procedures
other than those specified in this manual may result in hazardous radiation
your copy machine only as described in this documentation.
1166O263AA
This figure shows the view inside the Right Side Door with the
Imaging Unit removed.
Laser Aperture of the Print Head Unit
exposure. Because of this, Develop strongly recommends that you operate