Develop D 2500iD, Руководство по обслуживанию

Страница: 104 / 232

FrameMaker Ver.5.5(PC) Di250 SWITCHES ON PWBs/TECH. REP. SETTINGS
99.01.09
S-27
Tech. Rep. Mode Counter
Touch Panel
Display
Operation
Trouble <Trouble Counter 5/5>
<Clearing a Count>
Touch the item key whose count is to be cleared and press the Clear
key. If a count is accidentally cleared, pressing the Interrupt key will
undo the clear operation.
Device Shows the numbers of prints for different applications. It also allows
the Tech. Rep. to clear each counter.
<Clearing a Count>
Select the counter to be cleared with the item key and press the Clear
key. If the count is accidentally cleared, pressing the Interrupt key will
undo the clear operation.
Maintenance
•
This function allows the Tech. Rep. to set the number of copies to
be made before the Maintenance Call reminder is given. (1k ~
9999k)
•
It shows the current count value and the above setting. Each
counter may be reset to 0 independently of the others:
•
When the count reaches the preset value, the icon “ ” appears in
the Status Display.
✽
When “Call Indicated” is selected for “Maintenance Call” available
from Tech. Rep. Choice.
<Setting a Count>
1. Touch [Maintenance (Set)] and then press the Clear key to clear
the count. If the count is accidentally cleared, pressing the inter-
rupt key will undo the clear operation.
2. Enter the desired value from the 10-Key Pad.
<Clearing a Count>
Touch [Maintenance (Count)] and then press the Clear key to clear
the count. If the count is accidentally cleared, pressing the interrupt
key will undo the clear operation.
Malfunction
Code
Location
Malfunction
Code
Location
C133B
C13C0
C13D0 Communication Error (Option)
I/C Initial Error
EEPROM C13F0
C18XX HSYNC (SOS)
Printer Controller Error
Display Description
Copier No. of prints made by copier
Printer No. of prints made by printer
Report Print No. of report prints made
Fax Print No. of fax prints made
Fax Transmission No. of prints made for fax transmission
Display Description
Maintenance (Set) The Maintenance Call reminder is given when the count
reaches the preset value.
Maintenance (Count) Counts one for each copy made.