DEUTZ-FAHR MP135 R, Руководство по эксплуатации

Страница: 51 / 62

49
EN
16652807_en 05/2006
6 Service and maintenance
Warning !
Never carry out adjustment or repair work, or service and maintenance work, on the
machine when in operation. Switch off the tractor engine, remove the ignition key and
wait for the machine to come to a standstill before working on moving machine parts.
Shut the hydraulic shut-off tap before entering the bale chamber. Take care when opening
and closing the tailgate. No persons may remain in the swinging range.
To ensure the efficient running of the round baler and to avoid premature repairs, make sure that the
machine is well looked-after and that repairs are carried out in time.
6.1 Re-tightening screws
All screws and nuts should be re-tightened after 20 operating hours according to the given torques, see
Section A.1.
Retaining screws and locking nuts should be tightened by an additional 10%.
6.2 Checking wheels
Check that the wheel nuts and wheel caps are secure. The air pressure in the tyres should be 1.5 bar.
Re-tighten the wheel nuts after the first few operating hours. The torque moment for wheel nuts M18 x
1.5 is 325 Nm.