DEUTZ-FAHR MP135 R Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 62

background image

14

EN

16652807_en 05 /2006

1.8.3 Power take-off operation

Applies only to PTO driven equipment.
1. Use only universal drive shafts prescribed by the manufacturer.

Ensure that the universal drive shaft is correctly mounted and secured.
The protective tube and guard cone of the universal drive shaft must be properly attached and be in
perfect condition.
Protect guard cone of universal drive shaft from being turned by attaching the chain.
Ensure that the prescribed pipe overlaps are in transport and working position for the universal
drive shafts.

2. No one may enter the area of the turning universal drive shaft when working with the universal

drive shaft.

3. When using universal drive shafts with an excess load or free-running couplings, overload or free-

running couplings are to be attached to the equipment.

4. The universal drive shaft is only to be attached or detached when the PTO shaft and engine have

been switched off and the ignition key has been removed.
Place the uncoupled universal drive shaft on the appropriate mount or hang in the chain provided.
After detaching the universal drive shaft, place the protective cover on the PTO shaft end.

5. The PTO guard must be properly attached and be in perfect condition.

Before switching on the PTO shaft, ensure that the rpm selected and rotational direction of the
tractor PTO shaft corresponds with the permissible rpm and rotational direction of the device.
Before switching on the PTO shaft, ensure that no one is in the machine´s danger area.

6. Never switch the PTO shaft on while the machine is switched off.
7. Always switch off the PTO shaft if the angles of operation are too large or if you do not need it.
8. Only clean, lubricate or set the PTO driven equipment or universal drive shaft when the PTO shaft

and engine are switched off and the ignition key has been removed.

9. Any damage is to be repaired before using the machine.

«
...
14
15
16
17
18
...
»

Содержание MP135 R































































Отзывы:

Нет отзывов

Похожие инструкции для MP135 R

Бренд: Bacharach Страницы: 48

NI VISION PCI-8254R

Бренд: National Instruments Страницы: 13

NI VISION PCI-8254R

Бренд: National Instruments Страницы: 16

Бренд: National Instruments Страницы: 10

Бренд: National Instruments Страницы: 39

Бренд: National Instruments Страницы: 65

Бренд: haacon Страницы: 59

Бренд: Fast Страницы: 60

Tacx Boost Bundle

Бренд: Garmin Страницы: 12

Бренд: My-Doc Страницы: 32

Бренд: Spitzer LIGHTING Страницы: 2

Бренд: Cameo Страницы: 56

Serious Steel 805106

Бренд: ParaBody Страницы: 6

Z33-D060.02 S2A

Бренд: Jäger Страницы: 36

Royal Squat Rack SX-5 II

Бренд: KingsBox Страницы: 5

Бренд: TOPMAQ Страницы: 13

Бренд: RAB Страницы: 7

Airstream PNEG-362 2000 Series

Бренд: GSi Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды