48
EN
16652807_en 05 /2006
5.10 Winter storage
z
Clean the baler of crop remains and dirt,
z
Check the round baler for wear and damage and have it repaired,
z
Release the cutting bar of the net wrapping system (bar must be in contact with the anvil);
z
Attention! Keep hands clear of the working area of cutting bar and anvil. Danger of injury!
z
Clean all roll chains thoroughly and re-oil,
z
Lubricate all bearings on the ridged rollers,
z
Lightly oil the Opticut cutting blades,
z
Lubricate machine according to lubrication schedule,
z
Change the gear oil,
z
Position the baler so that it is stable and prevent from rolling away using wheel chocks,
z
Never allow children to play on or near the machine.
5.9
Storing the Round Baler
Before unhitching the Round Baler, remove the pto drive
shaft, disconnect the electric cable and the hydraulic
couplers from the tractor (Release pressure in the system
first - briefly open the tailgate, then return to zero setting)
and lower the prop stand as follows:
z
Remove the safety pin and fold down the prop
stand;
z
Fit safety pin at the top and secure by R-clip.
z
Turn prop stand down until drawbar is fully relieved
of load.
z
Place chock blocks under the wheels before
unhitching the Round Baler.
Warning !
Store machine on a level area only and
place chock blocks under the wheels to
ensure the machine will not move away.
Содержание MP135 R
