64
CL3
Series
5.0
Maintenance
•
Kit Contents Check List
Kit Contents Check List
Chart 5.3
•
Kit Contents for CL3 Series -
Reference the length column for your model.
Approvals
• ANSI Z83.20-2016 and CSA 2.34-2016
• Indoor approval
• Commercial approval
• Manufacturer’s Approval for CNG facilities
Limited Warranty
• 3 year - Burner box components
• 5 years - Combustion and radiant tubes
• 10 years - Stainless steel burner
• See page 63 for terms and conditions
Part No.
Description
CL3
-30-
[65, 75, 80, 85]
CL3
-40-
[65, 75, 80, 85]
CL3
-50-
[80, 85]
TP-19E
4" Elongated Hanger w/ Tension Spring
4
5
6
TP-21B
4" Tube Clamp
3
4
5
TP-82C
5” Reflector Center Support (RCS)
1
1
1
TP-82E
4” Elongated RCS
2
3
4
TP-83
24" S.S. Flexible Gas Connector
1
1
1
TP-105
Reflector End Cap
2
2
2
TP-106
Reflector End Cap Clips
8
8
8
LIOCL3
CL3 Series Installation Manual
1
1
1
Filled By:
TP-105
Reflector End Cap
TP-21B
4” Tube Clamp
TP-106
Reflector
End Cap Clips
CL3 Series Kit Contents
CL3 Series Installation,
Operation, and
Maintenance Manual
F/N: LIOCL3
TP-83
24” Stainless Steel
Flexible Gas Connector
© 2019 Detroit Radiant Products Co.
21400 Hoover Road • Warren, MI 48089
Phone: (586) 756-0950 Fax: (586) 756-2626
www.detroitradiant.com • [email protected]
Printed in U. S. A.
WARNING
!
Improper installation, adjustment, alteration, service, or maintenance can cause
property damage, injury, or death. Read the installation, operation, and maintenance
instructions thoroughly before installing or servicing this equipment.
This heater
must
be installed and serviced by trained gas installation and service
personnel only. Failure to comply could result in personal injury, asphyxiation, death,
fire, or property damage.
Do not
store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance.
In locations used for the storage of combustible materials, signs
must
be posted to
specify the maximum permissible stacking height to maintain the required
clearances from the heater to the combustibles. Signs must either be posted
adjacent to the heater thermostats or in the absence of such thermostats, in a
conspicuous location.
Do not use this heater in indoor living or sleeping quarters, etc.!
Installation of a
tube heater system in residential indoor living spaces may result in property damage,
serious injury, asphyxiation, or death.
CL3 Series
Installation Manual
The CX3 Series Infrared Tube Heater is a positive pressure, single-stage radiant heater system. This
manual provides specific information related to the CX3 Series model. All persons involved with the
installation, operation, and maintenance of the heater system must read and understand the
information in this manual.
For Your Safety
If you smell gas:
• Do not try to light any appliance.
• Immediately call your gas supplier from a neighbor’s phone.
• Do not touch any electrical switch.
• Follow the gas supplier’s instructions.
• Do not use any phone in your building. • If you cannot reach your gas supplier, call the fire department.
LIOCX3-Rev. 25417
Print: L-11/17 (DRPC)
INSTALLER:
Present this manual to the end user.
Keep these instructions in a clean and dry place for future reference.
Model#: ______________________ Serial #: _____________________________
(located on rating label)
TP-19E
4 in.
Elongated Hanger
TP-82E
4 in. Elongated
Refl. Center Support (RCS)
TP-82C
5 in. Elongated
Refl. Center Support (RCS)