DENTSPLY IRM Caps, Инструкция по эксплуатации

Страница: 10 / 69

gouging material with sharp burs at high speed.
Additional polishing is not recommended.
1.5 Periodically evaluate IRM ® Material intermediate
restoration until final restoration is indicated. The
IRM
® Material intermediate restoration should be
removed and final restoration completed within 1
year of placement.
2. Protective Base
When used as a protective base, final restorative
material used must not contain polymeric resin
components (e.g. final restoration of amalgam, gold)
2.1 Complete cavity preparation and pulp protection as
outlined in steps 1.1 and 1.2.
2.2 Mix IRM ® Caps ™ as outlined above in section 1.3.
2.3 Apply mixed material to desired dentin surfaces and
depth as outlined above in section 1.4.1.
2.4 Following completion of set (approximately 5 minutes
from start of mix) cavity refinement may be completed.
2.5 Complete restoration per restorative material
manufacturer’s directions for use.
CLEANING AND DISINFECTION
IRM ® Caps ™ are a one-time use product. Do not attempt
to clean, disinfect or re-use IRM ® Caps ™ . Properly dispose
used IRM ® Caps ™ .
Clean and disinfect amalgamator machine following
machine manufacturer’s directions.
LOT NUMBER AND EXPIRATION DATE
1. Do not use after expiration date.
2. The following numbers should be quoted in all
correspondences:
• Reorder number
• Lot number on the cartridge
• Expiration date
8