DENTSPLY IRM Caps, Инструкция по эксплуатации

Страница: 6 / 69

eugenol may interfere with the hardening and/or cause
softening of the polymeric components. (See
Contraindications, Warnings)
STEP-BY-STEP INSTRUCTIONS FOR USE
1. Intermediate (Temporary) Restoration
1.1 Cavity Preparation
1.1.1 Isolate field of operation in preferred manner.
Rubber dam is recommended.
1.1.2 Cavity preparation must provide for the
mechanical retention of the IRM ® Material.
1.1.3 If caries is present, completely excavate using
low-speed and/or hand instrumentation.
1.1.4 Place matrix and wedge where indicated.
1.1.5 Gently dry preparation with cotton pellet.
Avoid desiccation.
1.2 Pulp Protection: For direct and indirect pulp
capping, cover the dentin close to the pulp (less
than 1mm) with a hard setting calcium hydroxide
liner (Dycal
® Liner, see complete Directions for Use).
1.3 Mixing
1.3.1 To activate the IRM ® Caps ™ , hold vertically,
grasp bottom half and FIRMLY TIGHTEN the
top (see Fig. 1). As top is tightened, you will
feel a “snap” as the liquid is released.
Continue tightening until you are sure it cannot
be seated further.
4
Fig. 1