11 Electromagnetic compatibility
11.1 Accessories
Dentsply Sirona
Operating Instructions Xios AE Sensor USB interface and sensors
84
67 29 433 D3780
D3780.201.01.01.02 09.2019
11
Electromagnetic compatibility
Xios AE complies with the requirements for electromagnetic
compatibility (EMC) according to IEC 60601-1-2.
Xios AE is hereinafter referred to as the "UNIT". Observance of the
following information is necessary to ensure safe operation regarding
EMC aspects.
11.1
Accessories
Designation of the interface cable:
USB 3 cable A/micro-B
The UNIT may only be operated with accessories and spare parts
approved by Sirona. Unapproved accessories and spare parts may lead
to an increased emission or to a reduced immunity to interference.
The UNIT should not be operated in the immediate vicinity of other
devices. If this proves to be unavoidable, the UNIT should be monitored
to check and make sure that it is used properly.
11.2
Electromagnetic emission
The UNIT is intended for operation in the electromagnetic environment
specified below.
The customer or user of the UNIT should make sure that it is used in
such an environment.
Emission measurement
Conformity
Electromagnetic environment - guidelines
RF emissions according to CISPR 11
Group 1
The UNIT uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in
nearby electronic equipment.
RF emissions according to CISPR 11
Class B
The UNIT is intended for use in all facilities, in-
cluding residential areas and in any facilities con-
nected directly to a public power supply providing
electricity to buildings used for residential pur-
poses.
Harmonics
according to IEC 61000-3-2
Class A
Voltage fluctuations / flicker according
to IEC 61000-3-3
coincides
