6 Edit exposures
6.1 Edit exposures in X-ray series
Dentsply Sirona
Operating Instructions Xios AE Sensor USB interface and sensors
66
67 29 433 D3780
D3780.201.01.01.02 09.2019
6.1.5
Retaking images
Performing an image retake — a feature also available in the
"Light
Box" — is available for any image in the current exam at any time. Most
commonly, this feature is used immediately after an image is acquired.
Some typical reasons for retaking an image would be the result of
unexpected patient or sensor movement, adjustment in X-ray settings,
or improvement in image placement or quality.
To retake an image, please perform the following steps:
ü
There is at least one image in the series.
1.
Click on an image in the Acquisition view.
2.
Locate the
Retake button below the "Selected Image" window and
click on it.
Ä
The Retake image window is displayed, consisting of two
exposure windows—
"Current Image"and "New Image".
Ä
New Image functions just as any empty exposure window
selected for imaging. It flashes red initially, as the sensor
prepares for an exposure, and flashes green when the sensor is
ready.
3.
Check that the X-ray tube assembly is in the correct position and
take the X-ray exposure.
4.
Select the desired image and click on the
Accept button. The
alternate image is removed from the exam, although it is still
present in the
"Timeline".
5.
Perform other actions in Acquisition view, if any, then click the
"Finish"button to continue to the "Light Box" .
