DentalEZ Core, Руководство пользователя, Страница: 16 / 57

13
www.DentalEZ.com 866-DTE-INFO
13
DentalEZ
®
Equipment
PN: 2717-267C
Magellan Unit Support
Section III Installation
Parts Included
• Magellan Unit Support
• Three Leveling Set Screws
• M16 Bolt
NOTE: If support is preinstalled, proceed to Step 6 .
CORE Chair
1. Raise the chair base and back to full UP
position.
2. Disconnect the chair from the power supply.
3. Take o ff the chair seat upholstery by removing
the fi ve Phillips-head screws from underneath
the chair (Figure 7) .
Pinch Bolt &
Washer
Figure 6. Magellan unit support
Leveling Set
Screw Holes (3)
4. Position the Magellan unit support so that
the lip of the chair rests underneath the lip of
the washer. The mount will hold itself in place
(Figure 8 and Figure 9) .
5. Install the M16 bolt loosely into the back of the
mount and into the chair.
6. If support is preinstalled, loosen (but do not
remove) M16 bolt to allow for leveling
(Figure 10) .
Figure 7. Remove fi ve (5) Phillips-head screws
Phillips-head Screws (5)
Figure 8. Position the unit support under the chair
Unit Support
Figure 9. Slide lip of washer onto lip of chair
M16 Bolt
Leveling
Set
Screws
Figure 10. M16 bolt