Denso BHT-1260BWB-CE, Руководство пользователя

Страница: 248 / 251

236
BHT-1200 Series
9.5.4 The spare battery and charge LED
Procedure Charging Status Spare battery charge LED
Standby
⇓
Load the battery in the spare battery
charge slot of the CU.
⇓
Charging
⇓
After approx. 3 hours
(standard rechargeable battery)
or 4.5 hours
(large-capacity rechargeable battery)
⇓
Completed
⇓
Remove the battery
Standby
−
Point
−

Full charging takes approximately 3 hours (standard rechargeable battery) or 4.5 hours
(large-capacity rechargeable battery).

A slightly discharged battery takes less than 3 hours to fully charge.

If the spare battery charge LED flashes in red the causes are as follows, and the proper action
stated below must be taken.
・
Abnormal temperature of the battery is detected.
・
Charge the battery under the proper temperature (10
°
to 40
°
C ).
・
Avoid places where there are objects generating heat nearby or exposed to direct sunlight.
・
Stop charging and replace the battery even though there are no objects generating heat nearby.
・
Charge terminal contact failure
・
Wipe any dirt or dust from the charge terminals as described in Chapter 6, 6.4 Daily Maintenance.
・
Charging is not completed even after the specified time has elapsed.
・
Stop charging if not using a dedicated AC adapter to charge the battery.
・
The battery is broken or the battery life has ended.
・
Replace the battery.
OFF
ON (red)
ON (green)
OFF