Denios SpillGuard, Быстрое руководство

Страница: 12 / 25

Quick Guide
22/48 23/48
SpillGuard® connect Quick Guide | 276016 | Rev. 1
3.
Now create an account and read through
the General Terms and Conditions as well
as the Privacy Policy.
Sign Up
muster@denios.de
•••••••••
DENIOS AG
Dehmer Straße 58-66
By signing up, you agree to
our terms of service
4.
Following successful registration, the
SpillGuard® connect web application
opens automatically
3.4. Activating and configuring
SpillGuard® connect
1.
Press the button „Activate device“
+
Activate device
2.
Complete all the data fields.
Notice:
The more complete your data, the more
efficiently and specifically the information
will be transmitted in the event of an
emergency!
3.
Click „Save“ to save your data
4. Set-up and operation
4.1. Switching on and calibrating
SpillGuard® connect
1.
Position SpillGuard® connect at the lowest
point of the spill sump with the sensor
surface towards the bottom.
2. Press and hold the Push button until the
beep sounds.
1 beep
LED
LED flashes quickly
3.
The calibration process is complete after
approx. 30 seconds.
2 beeps
LED
LED flashes once a minute
SpillGuard® connect is ready for
operation.
4.2. Calibration for a new location
When installing SpillGuard® connect in a new
location proceed as follows:
1.
Press and hold the button until the beep
is heard to switch off SpillGuard® connect.
1 beep
2. Position SpillGuard® connect in the new
location.
3. Press and hold the button until the beep
is heard.
1 beep
LED
LED flashes quickly
4. The calibration process is complete after
approx. 30 seconds.
2 beeps
LED
LED flashes once a minute
SpillGuard® connect is ready for
operation.
SIGN UP