DeltaOHM HD2010UC/A, Руководство по эксплуатации

Страница: 83 / 162

HD2010UC/A
- 83 -
V4.1
Command Format Description
SER_MON C1 CURSOR RIGHT key
STORE C1 Simulates the PRINT key to be pressed for more than 2 sec
DATA_LOG C1 Simulates the REC key to be pressed for more then 2 sec
PRN_VAL C1 REC+RUN key
EXEC C2 PRINT key without printing the heading
STT GROUP (STATUS)
The following table shows the command list of the STT group (STATUS).
Command Description
ACQUISITION Acquisition control
DISPLAY Display management
MONITOR Monitor function via RS232
RECORDER Recording management
The STT:ACQUISITION commands are provided in the following table.
Command Format Description
HOLD D1 Interrupts display update
UPDATE D1 Restarts display update
PAUSE D1 Measurement in pause
RUN D1 Starts measurements
STOP D1 Ends measurements
CLEAR D1 Clears measured levels
CONTINUE D1 Restarts measuring
ERASE D1 Erases the last x seconds of measurements
RECORD D1 Starts and records measurements
The STT:ACQUISITION:? command provides information on the acquisition status as shown in
the following example.
STT:ACQ:?
STT:ACQUISITION:STOP
BATTERY: 32%
MEMORY: 95.4%
DUMP TIME:00:00:01
LAST CALIBRATION: 2003/07/31 08:37
The STT:DISPLAY commands are listed in the table below.
Command Format Description
SLM D1 Displays 5 selectable parameters in numeric format
PROFILE D1 Displays the time profile of a selectable parameter
OCTAVE D1 Displays the spectrum by octave bands
THIRD_OCTAVE D1 Display the spectrum by one-third octave bands
PROB_DISTR. D1 Displays the level distribution of probabilities
CUMUL_DISTR. D1 Displays the percentile levels graph