Delta RPI153FA0E0000 Скачать руководство пользователя страница 45

Страница: 45 / 164

Installation and Operating Manual for RPI M15A M20A Solar Inverter V1.0 2016-03-18

7 Installation

Installation

► Read the chapter “1. Planning the installa-

tion”, page 1 and this chapter through

completely before starting work on the instal-

lation.

7.1 Safety information

DANGER

Electric shock

During operation there is a potentially lethal volt-

age present inside the inverter. Even after the

inverter has been disconnected from all power

sources, this voltage is present in the inverter for

up to a further 80 seconds.

Therefore always perform the following work

steps before working on the inverter

Turn the DC disconnector to the

OFF

posi-

tion.

Disconnect the inverter from all AC and DC

sources and make sure that none of the con-

nections can be inadvertently re-established.

Wait at least 80 seconds to allow the internal

capacitors to discharge.

DANGER

Electric shock

There is a potentially lethal voltage present

on the DC terminals of the inverter. The solar

modules start to produce current as soon as light

falls on them. This occurs even if the light is not

shining directly on the solar modules.

► Never disconnect the inverter from the solar

modules when it is under load.

► Turn the DC disconnector to the

OFF

posi-

tion.

► Disconnect the connection to the grid so that

the inverter cannot supply any energy to it.

► Disconnect the inverter from all AC and DC

sources. Make sure that none of the connec-

tions can be inadvertently re-established.

► Protect the DC cables from being inadvert-

ently touched.

WARNING

Heavy weight

The inverter is very heavy.

► The inverter must be lifted and carried by at

least 2 people or with suitable lifting gear.

NOTE

Water ingress.

► All sealing caps that were removed during the

installation should be kept for future use (e.g.

transport or storage).

► Never open the inverter housing! Otherwise

the guarantee will be void.

7.2 Sequence of installation steps

The connections for RS485, the dry contacts and

the external power off (EPO) are all located on

the communications card. These installation tasks

can therefore be combined.

Recommended sequence of installation steps:
1.  Installing the inverter
2.  Grounding the inverter housing
3.  Connecting the communications card

4. Connecting the dry contacts and the external power off

(optional)

5. Connecting the grid (AC)
6. Connecting the solar modules (DC)

Содержание RPI153FA0E0000





































































































































































Результаты поиска

Содержание RPI153FA0E0000

Отзывы:

Похожие инструкции для RPI153FA0E0000

Бренды по названию

Популярные бренды

Delta RPI153FA0E0000, Инструкция по установке и эксплуатации

Результаты поиска

Содержание RPI153FA0E0000

Отзывы:

Похожие инструкции для RPI153FA0E0000

Бренды по названию

Популярные бренды