9 Settings
Installation and Operating Manual for RPI M15A M20A Solar Inverter V1.0 2016-03-18
118
→ The mode is set.
%
[ 100 ]
Set Point
Actual / Rated Power
Mode
100
[ Rated ]
[ ON ]
21. Jun 2013 09:30
Active Power Control
Changing settings
The procedure is identical for all parameters.
1.
Using the
and
buttons, select a parameter and
press the
ENT
button.
%
[ 100 ]
Set Point
Actual / Rated Power
Mode
100
[ Rated ]
[ OFF ]
21. Jun 2013 09:30
Active Power Control
→ The value is highlighted and can be changed.
%
[ 100 ]
Set Point
Actual / Rated Power
Mode
100
[ Rated ]
[ OFF ]
21. Jun 2013 09:30
Active Power Control
2.
Use the
and
buttons to select the value.
%
[ 90 ]
Set Point
Actual / Rated Power
Mode
100
[ Rated ]
[ OFF ]
21. Jun 2013 09:30
Active Power Control
3.
Press the
ENT
button to confirm.
→ The parameter is set.
%
[ 90 ]
Set Point
Actual / Rated Power
Mode
100
[ Rated ]
[ OFF ]
21. Jun 2013 09:30
Active Power Control
Finalising the setting
1.
Press the
EX IT
button to finalise the setting.
þ
When the function is switched on, a check mark will be dis-
played before the function name.
✓
Power Limit
Power vs. Frequency
P(V)
21. Jun 2013 09:30
Active Power Control
