background image

92

Troubleshooting Tools

3

Chipset error.

Contact Dell (see "Contacting Dell" on 
page 141).

Time-of-day clock test 
failure.

• Replace the battery (see "Replacing the 

Battery" in the 

Service Manual

 on the 

Dell Support website at 

support.dell.com

).

• If the problem persists, contact Dell 

(see

"Contacting Dell

" on page 141

).

Gate A20 failure. 
Possible motherboard 
failure.

Contact Dell (see "Contacting Dell" on 
page 141).

Super I/O chip failure. 
Possible motherboard 
failure.

Contact Dell (see "Contacting Dell" on 
page 141).

Keyboard controller 
test failure. Possible 
keyboard failure.

• Ensure that the cables are connected 

properly.

• If the problem persists, contact Dell (see 

"Contacting Dell

" on page 141

).

4

RAM Read/Write 
failure.

• Ensure that no special requirements for 

memory module/connector placement 
exist (see "Memory" in the 

Service 

Manual 

on the Dell Support website at 

support.dell.com

).

• Ensure that the memory you are using is 

supported by your computer (see 
"Memory" in the 

Service Manual

 on the 

Dell Support website at 

support.dell.com

).

• If the problem persists, contact Dell (see 

"Contacting Dell

" on page 141

).

Code
(repetitive 
short beeps)

Description

Suggested Remedy

book.book  Page 92  Friday, April 25, 2008  3:58 PM

Содержание XPS 630









































































































































































Отзывы: