Dell S4820T, Руководство по настройке

Страница: 839 / 1178

45
Remote Monitoring (RMON)
Remote monitoring (RMON) is supported on Dell Networking OS.
RMON is an industry-standard implementation that monitors network traffic by sharing network
monitoring information. RMON provides both 32-bit and 64-bit monitoring facility and long-term
statistics collection on Dell Networking Ethernet interfaces.
RMON operates with the simple network management protocol (SNMP) and monitors all nodes on a
local area network (LAN) segment. RMON monitors traffic passing through the router and segment traffic
not destined for the router. The monitored interfaces may be chosen by using alarms and events with
standard management information bases (MIBs).
Implementation Information
Configure SNMP prior to setting up RMON.
For a complete SNMP implementation description, refer to Simple Network Management Protocol
(SNMP) .
Configuring RMON requires using the RMON CLI and includes the following tasks:
• Setting the rmon Alarm
• Configuring an RMON Event
• Configuring RMON Collection Statistics
• Configuring the RMON Collection History
RMON implements the following standard request for comments (RFCs) (for more information, refer to
the
Standards Compliance chapter).
• RFC-2819
• RFC-3273
• RFC-3434
• RFC-4502
Fault Recovery
RMON provides the following fault recovery functions.
• Interface Down — When an RMON-enabled interface goes down, monitoring continues. However, all
data values are registered as 0xFFFFFFFF (32 bits) or ixFFFFFFFFFFFFFFFF (64 bits). When the interface
comes back up, RMON monitoring processes resumes.
Remote Monitoring (RMON)
839