Dell S4820T, Руководство по настройке

Страница: 873 / 1178

aaa authorization commands 1 default none
aaa authorization commands 15 default none
aaa accounting exec default start-stop
aaa accounting commands 1 default start-stop
aaa accounting commands 15 default start-stop
Dell(conf)#
Dell(conf)#do show run
!
tacacs-server key 7 d05206c308f4d35b
tacacs-server host 10.10.10.10 timeout 1
Dell(conf)# tacacs-server key angeline
Dell(conf)#%RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user admin on
vty0 (10.11.9.209)
%RPM0-P:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password
authentication success on vty0 ( 10.11.9.209 )
%RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user admin on line
vty0 (10.11.9.209)
Dell(conf)#username angeline password angeline
Dell(conf)#%RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user angeline
on vty0 (10.11.9.209)
%RPM0-P:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password
authentication success on vty0 ( 10.11.9.209 )
Monitoring
To view information on transactions, use the following command.
• View transactions to troubleshoot problems.
EXEC Privilege mode
debug
Remote Authentication
When configuring a server host, you can set different communication parameters, such as the
key password.
Example of Specifying a Server Host
Dell(conf)#
Dell(conf)#aaa authentication login tacacsmethod
Dell(conf)#aaa authentication exec tacacsauthorization
Dell(conf)#tacacs-server host 25.1.1.2 key Force
Dell(conf)#
Dell(conf)#line vty 0 9
Dell(config-line-vty)#login authentication tacacsmethod
Dell(config-line-vty)#end
Specifying a Server Host
To specify a server host and configure its communication parameters, use the following
command.
• Enter the host name or IP address of the server host.
CONFIGURATION mode
Security
873