Dell S4820T, Руководство по настройке

Страница: 56 / 1178

Table 3. Forming a
copy
Command
Location source-file-url Syntax destination-file-url Syntax
For a remote file location:
FTP server
copy ftp: //
username:password@{hostip
| hostname}/filepath/
filename
ftp: //
username:password@{hostip
| hostname}/ filepath/
filename
For a remote file location:
TFTP server
copy tftp: //{hostip |
hostname}/filepath/
filename
tftp: //{hostip |
hostname}/filepath/
filename
For a remote file location:
SCP server
copy scp: //{hostip |
hostname}/filepath/
filename
scp: //{hostip |
hostname}/filepath/
filename
Important Points to Remember
• You may not copy a file from one remote system to another.
• You may not copy a file from one location to the same location.
• When copying to a server, you can only use a hostname if a domain name server (DNS) server is
configured.
Example of Copying a File to an FTP Server
Dell#copy flash://Dell-EF-8.2.1.0.bin ftp://myusername:mypassword@10.10.10.10/
/Dell/Dell-EF-8.2.1.0
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
27952672 bytes successfully copied
Example of Importing a File to the Local System
core1#$//copy ftp://myusername:mypassword@10.10.10.10//Dell/
Dell-EF-8.2.1.0.bin flash://
Destination file name [Dell-EF-8.2.1.0.bin.bin]:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
26292881 bytes successfully copied
Mounting an NFS File System
This feature enables you to quickly access data on an NFS mounted file system. You can perform file
operations on an NFS mounted file system using supported file commands.
This feature allows an NFS mounted device to be recognized as a file system. This file system is visible on
the device and you can execute all file commands that are available on conventional file systems such as
a Flash file system.
Before executing any CLI command to perform file operations, you must first mount the NFS file system
to a mount-point on the device. Since multiple mount-points exist on a device, it is mandatory to specify
the mount-point to which you want to load the system. The
/f10/mnt/nfs
directory is the root of all
mount-points.
To mount an NFS file system, perform the following steps:
56
Getting Started