Dell Precision M6300 Скачать руководство пользователя страница 273

Страница: 273 / 292

Appendix

273

Appendix

Macrovision Product Notice

This product incorporates copyright protection technology that is protected

by U.S. patents and other intellectual property rights. Use of this copyright

protection technology must be authorized by Macrovision, and is intended

for home and other limited viewing uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering or disassembly is prohibited.

FCC Notice (U.S. Only)

FCC Class B

This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the manufacturer’s instruction

manual, may cause interference with radio and television reception. This

equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference

that may cause undesired operation.

NOTICE:

The FCC regulations provide that changes or modifications not expressly

approved by Dell Inc. could void your authority to operate this equipment.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

book.book Page 273 Tuesday, August 28, 2007 10:20 AM

Содержание Precision M6300





































































































































































































































































































Результаты поиска

Содержание Precision M6300

Отзывы:

Похожие инструкции для Precision M6300

Бренды по названию

Популярные бренды

Dell Precision M6300, Руководство пользователя

Результаты поиска

Содержание Precision M6300

Отзывы:

Похожие инструкции для Precision M6300

Бренды по названию

Популярные бренды