Dell PowerVault NX200 Скачать руководство пользователя страница 21

Страница: 21 / 166

About Your System

Guidelines for Connecting External Devices

• Turn off power to the system and external devices before attaching a new

external device. Turn on any external devices before turning on the system

(unless the documentation for the device specifies otherwise).

• Ensure that the appropriate driver for the attached device has been

installed on the system.

• If necessary, to enable ports on your system, use the System Setup

program. See "Using the System Setup Program and UEFI Boot Manager"

on page 51.

NIC Indicator Codes

link indicator

activity indicator

Indicator

Indicator Code

Link and activity

indicators are off

The NIC is not connected to the network.

Link indicator is green

The NIC is connected to a valid network link

at 1000 Mbps.

Link indicator is amber

The NIC is connected to a valid network link

at 10/100 Mbps.

Activity indicator is

blinking green

Network data is being sent or received.

book.book Page 21 Monday, August 9, 2010 3:07 PM

Содержание PowerVault NX200







































































































































































Результаты поиска

Содержание PowerVault NX200

Отзывы:

Dell PowerVault NX200, Руководство владельца оборудования, Страница: 21 / 166

Результаты поиска

Содержание PowerVault NX200

Отзывы: