Dell PowerVault MD3060e Series, Руководство CLI

Страница: 186 / 226

Parameters
Parameter Description
daysToNextLearnCycle Valid values are
0
through
7
, where,
0
is immediately and
7
is in seven days. The
daysToNextLearnCycle
parameter takes place up to seven days after the next
scheduled learn cycle.
day Valid values for the day parameter include the days of the
week. Setting the day causes the next learn cycle to be
scheduled on the specified day, after the currently
scheduled learn cycle.
time The time in 24-hour format; for example 8:00 a.m. is
entered as 08:00. Nine o’clock p.m. is entered as 21:00, and
9:30 p.m. is entered as 21:30.
NOTE: You can set the learn cycle to occur only once during a seven-day period. The time parameter selects a
specific time that you want to run the learn cycle. If a value is not entered, the command uses a default value of
00:00 (midnight). If the day and time specified are in the past, the next learn cycle takes place on the next possible
day specified.
Set Storage Array Redundancy Mode
This command sets the redundancy mode of the storage array to either simplex or duplex.
Syntax
set storageArray redundancyMode=(simplex | duplex)
Parameter
Parameter Description
redundancyMode
Use simplex mode when you have a single RAID controller
module. Use duplex mode when you have two RAID
controller modules
Set Storage Array Security Key
Use this command to set the security key that is used throughout the storage array to implement the Physical Disk
Security premium feature. When any security-capable physical disk in the storage array is assigned to a secured disk
group, that physical disk is security-enabled using the security key. Before you can set the security key, you must use
the
create storageArray securityKey
command to create the security key.
Syntax
set storageArray securityKey
Parameters
None.
Additional Information
Security-capable physical disks have hardware to accelerate cryptographic processing and each has a unique physical
disk key. A security-capable physical disk behaves like any other physical disk until it is added to a secured disk group.
When a security-capable physical disk is added to a secured disk group, it becomes security-enabled.
186