Dell PowerVault MD3060e Series, Руководство CLI

Страница: 159 / 226

Parameters
Parameter Description
controller RAID controller module with the NVSRAM values to save.
Valid RAID controller module identifier values are
0
and
1
.
The identifier value is
0
for the RAID controller module on
the top and
1
for the RAID controller module on the
bottom when viewed from the rear of the enclosure. You
must put brackets ([ ]) around the RAID controller module
identifier.
file Name of the file in which to save the values. You must put
quotation marks (" ") around the file name.
Save Storage Array Configuration
This command creates a script file that you can use to create the current storage array virtual disk configuration.
Syntax
save storageArray configuration file=" filename "
[(allConfig | globalSettings=(TRUE | FALSE) virtualDiskConfigAndSettings=(TRUE
| FALSE)
hostTopology=(TRUE | FALSE)
lunMappings=(TRUE | FALSE))]
Parameters
Parameter Description
file Name of the file that contains the configuration values.
You must put quotation marks (" ") around the file name.
allConfig Saves all of the configuration values to the file. (If you
choose this parameter, all of the configuration parameters
are set to
TRUE
.)
globalSettings Saves the global settings to the file. To save the global
settings, set this parameter to
TRUE
. To prevent saving
the global settings, set this parameter to
FALSE
. The
default value is
TRUE
.
virtualDiskConfigAndSettings Saves the virtual disk configuration settings and all of the
global settings to the file. To save the virtual disk
configuration and global settings, set this parameter to
TRUE
. To prevent saving the virtual disk configuration and
global settings, set this parameter to
FALSE
. The default
value is
TRUE
.
hostTopology Saves the host topology to the file. To save the host
topology, set this parameter to
TRUE
. To prevent saving
the host topology, set this parameter to
FALSE
. The
default value is
FALSE
.
lunMappings Saves the LUN mapping to the file. To save the LUN
mapping, set this parameter to
TRUE
. To prevent saving
159