Dell PowerVault MD3060e Series, Руководство CLI

Страница: 212 / 226

Parameter Description
patternNumber The hexadecimal data pattern you want to use to run the
test.
This number can be any hexadecimal number between
0000 to FFFF.
maxErrorCount The number of errors that you want to accept before
terminating the test.
testIterations The number of times that you want to repeat the test.
timeout The length of time in minutes that you want to run the test.
NOTE: Use the
save physicalDiskChannel faultDiagnostics
command and the
stop
physicalDiskChannel faultDiagnostics
command in association with the
start
physicalDiskChannel faultDiagnostics
command. These commands are needed to save the
diagnostic test results to a file and to stop the diagnostic test.
NOTE: You can stop this command at any time by pressing Ctrl+C.
Start Physical Disk Initialize
This command starts physical disk initialization.
CAUTION: As soon as you enter this command, all user data is erased.
Syntax
start physicalDisk [ enclosureID,slotID ] initialize
Parameters
Parameter Description
physicalDisk Identifies the enclosure and slot where the physical disk
resides. Enclosure ID values are
0
to
99
. Slot ID values
are
0
to
31
. You must put brackets ([ ]) around the
enclosure ID value and slot ID value.
Start Physical Disk Reconstruction
This command starts reconstructing a physical disk.
Syntax
start physicalDisk [ enclosureID,slotID ] reconstruct
Parameters
Parameter Description
physicalDisk Identifies the enclosure and slot where the physical disk
resides. Enclosure ID values are
0
to
99
. Slot ID values
are
0
to
31
. You must put brackets ([ ]) around the
enclosure ID value and slot ID value.
212