manualshive.com logo in svg

Dell PowerVault MD3060e Series, Руководство CLI

Серия Dell PowerVault MD3060e - это высокопроизводительное хранилище данных, специально разработанное для предприятий. Установочное руководство доступно для скачивания бесплатно на manualshive.com. Этот мануал поможет вам правильно настроить и использовать вашу систему хранения данных для оптимальной производительности и надежности.

Поделиться
Скачать
background image

The following example shows how to use this command to set hot spare physical disks:

client>smcli 123.45.67.89 -c "set physicalDisks

[0,2 0,3] hotSpare=TRUE;"

Enter the enclosure ID and slot ID of each physical disk that you want to use. You must put brackets ([ ]) around the list. 
Separate the enclosure ID and slot ID of a physical disk by a comma. Separate each enclosure ID and slot ID pair by a 
space.

Selecting The Event Levels For Alert Notifications

The MD storage management software has four event levels: Critical, Informational, Warning, and Debug. You can 
configure the MD storage management software to send alert notifications for all of these event levels or only for 
certain event levels.
A background task called the persistent monitor runs independently of the MD storage management software and 
monitors the occurrence of events on all of the managed storage arrays. The persistent monitor is installed 
automatically with the MD storage management software. When an event occurs, alert notifications in the form of 
emails and SNMP trap messages are sent to the destination addresses that are specified in the Configure Alerts dialog. 
For more information about how to specify the destination addresses, refer to the 

Configuring the Email and SNMP Alert 

Notification Settings

 online help topic in the Enterprise Management Window (EMW).

When the persistent monitor starts for the first time, a properties file is created in the directory where the MD storage 
management software files are located. The properties file can be configured to enable or disable local logging in the 
Windows and UNIX operating systems. By default, local logging is enabled in the properties file.
When local logging is enabled in the Windows operating system, the persistent monitor logs the event information in the 
Windows Event Log file. When local logging is enabled in the UNIX operating system, the persistent monitor logs the 
event information in the syslog file. The properties file can also be configured to enable or disable remote syslog 
notification. You must restart the persistent monitor service after configuring the properties file for the changes to take 
effect.
You can configure the MD storage management software to notify only the event levels that you specify. For example, 
you can configure alert notifications only for Critical and Warning events.

1.

Open the Configure Alerts dialog by performing one of these actions:
a) Select a storage array in the Devices tab in the EMW.
b) Select Edit 

→ 

Configure Alerts.

The Configure Alerts dialog is displayed. Go to step 3.

c) Select Configure Alerts in the Setup tab in the EMW. Go to step 2.

2.

Select the All storage arrays radio button, and click OK.
The Configure Alerts dialog is displayed.

3.

Select the Filtering tab.

4.

Select the check boxes next to the event levels for which the MD storage management software must send alert 

notifications.

NOTE: The configuration to send alert notifications for only certain event levels applies to all of the managed 
storage arrays in the MD storage management software.

5.

Click OK.

Configuring Alert Notifications

You can use the Configure Alerts dialog box to set up an email alert notification in the event of an error on the network. 
Alert emails are sent to the specified global mail server and sender email addresses in the event of an error on the 
selected hosts of storage arrays. You can choose to be alerted to all problems or individual problems.

43

Содержание PowerVault MD3060e Series



































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault MD3060e Series

IBM 5110 Basic Introduction preview
5110
Бренд: IBM Страницы: 170
IBM 5110 Maintenance Analysis Procedures preview
5110
Бренд: IBM Страницы: 257
IBM 5110 General Information And Physical Planning Manual preview
5110
Бренд: IBM Страницы: 63
ECS LIVA One H310C User Manual preview
LIVA One H310C
Бренд: ECS Страницы: 53
Moxa Technologies W406 Series User Manual preview
W406 Series
Бренд: Moxa Technologies Страницы: 27
Vecow RCX-1000 User Manual preview
RCX-1000
Бренд: Vecow Страницы: 160
Alienware 13 R3 Setup And Specifications preview
13 R3
Бренд: Alienware Страницы: 20
Vivo DESK-V000EE Instruction Manual preview
DESK-V000EE
Бренд: Vivo Страницы: 4
Kontron Embedded Computers JRex-IBOX User Manual preview
JRex-IBOX
Бренд: Kontron Embedded Computers Страницы: 48
Dell OptiPlex 7080 Micro Service Manual preview
OptiPlex 7080 Micro
Бренд: Dell Страницы: 57
Sony PCV-W20 Marketing s Specifications preview
PCV-W20 Marketing s
Бренд: Sony Страницы: 1
Sony PCV-V300G VAIO User Guide (primary manual) Specifications preview
PCV-V300G VAIO User Guide (primary manual)
Бренд: Sony Страницы: 1
Sony PCV-W30 VAIO User Guide (primary manual) Manual preview
PCV-W30 VAIO User Guide (primary manual)
Бренд: Sony Страницы: 74
Sony PCV-W20 - VAIO - 512 MB RAM Online Help Manual preview
PCV-W20 - VAIO - 512 MB RAM
Бренд: Sony Страницы: 103
Sony PCV-V300G VAIO User Guide (primary manual) User Manual preview
PCV-V300G VAIO User Guide (primary manual)
Бренд: Sony Страницы: 209
Moxa Technologies DA-681C Series Quick Installation Manual preview
DA-681C Series
Бренд: Moxa Technologies Страницы: 6
Broage NBOOK Quick Manual preview
NBOOK
Бренд: Broage Страницы: 11
Sporty's E6B Manual preview
E6B
Бренд: Sporty's Страницы: 54

Бренды по названию

Популярные бренды

Загрузить еще бренды