manualshive.com logo in svg

Dell PowerVault MD3060e Series, Руководство CLI, Страница: 104 / 226

Поделиться
Скачать
Dell PowerVault MD3060e Series Скачать руководство пользователя страница 104

CAUTION: As soon as you run this command, the contents of the existing pending area in the storage array are 
deleted.

Syntax

clear storageArray firmwarePendingArea

Parameters
None.

Clear Storage Array Recovery Mode

This command forces a storage array to exit recovery mode.
Syntax

clear storageArray recoveryMode

Notes
Recovery mode is entered during start-of-day operations when the system configuration is cleared and a valid on-board 
backup is available. This mode is exited by either restoring the system configuration from a backup location, or by 
clearing the existing on-board backups. While recovery mode is in force, a needs attention condition is raised and the 
Recovery Guru becomes available from the user interface. However, the system configuration is empty during recovery 
mode.

Clear Virtual Disk Reservations

This command clears persistent virtual disk reservations.
Syntax

clear (allVirtualDisks | virtualDisk [

virtualDiskName

]

| virtualDisks [

virtualDiskName1

... 

virtualDiskNameN

])

reservations

Parameters

Parameter

Description

allVirtualDisks

Clears reservations on all virtual disks in the storage 

array.

virtualDisk

 or 

virtualDisks

Name of the specific virtual disk for which to clear 

reservations. You can enter more than one virtual disk 

name. You must put brackets ([ ]) around the virtual disk 

name. If the virtual disk name has special characters, you 

must also put quotation marks (" ") around the virtual disk 

name.

NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names. 
Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace 
square brackets ([ ]) with angle brackets (< >) to overcome this limitation.

Clear Virtual Disk Unreadable Sectors

This command clears the unreadable sector information from one or more virtual disks.

104

Содержание PowerVault MD3060e Series



































































































































































































































Отзывы:

Нет отзывов