Dell PowerVault MD3060e Series, Руководство CLI

Страница: 173 / 226

Syntax
set iscsiTarget [“ iscsiID ”]
(authenticationMethod=(none | chap) |
chapSecret=” securityKey ” |
targetAlias=” userLabel ”)
Parameters
Parameter Description
iSCSIID The iSCSI target for which you want to set properties.
Enclose the name in double quotation marks (“ ”). You
must also enclose the iscsiID in either square brackets
([ ]) or angle brackets (< >).
authenticationMethod The means of authenticating your iSCSI session.
chapSecret The password that you want to use to authenticate a peer
connection.
targetAlias The name that you want to use for the target.
NOTE: Challenge Handshake Authentication Protocol (CHAP) is a protocol that authenticates the peer of a
connection. CHAP is based upon the peers sharing a “secret.” A secret is a security key that is similar to a
password.
NOTE: Use the
chapSecret
parameter only for initiators requiring mutual authentication.
NOTE: The
targetAlias
is a descriptive name that you can give to the target to help make it easier to identify.
You can use any combination of alphanumeric characters, hyphens, and underscores for the
targetAlias
. The
targetAlias
can have a maximum of 30 characters.
Set Physical Disk Channel Status
This command defines how the physical disk channel performs.
Syntax
set physicalDiskChannel [(1 | 2)]
status=(optimal | degraded)
Parameters
Parameter Description
physicalDiskChannel Identifier number of the physical disk channel for which to
set the status. Valid physical disk channel values are
1
or
2
. You must put brackets ([ ]) around the physical disk
channel number.
status Condition of the channel. You can set the channel status
to
optimal
or
degraded
.
173