Dell PowerVault MD3060e Series, Руководство CLI

Страница: 17 / 226

Parameter Definition
everyEvent
. If you set the
-I
parameter to either
profile
or
supportBundle
, this information is
included with the e-mails with the frequency specified by
the
-q
parameter.
Valid frequency arguments are:
•
everyEvent
— Information is returned with
every e-mail alert notification.
•
2
— Information is returned no more than once
every two hours.
•
4
— Information is returned no more than once
every four hours.
•
8
— Information is returned no more than once
every eight hours.
•
12
— Information is returned no more than once
every 12 hours.
•
24
— Information is returned no more than once
every 24 hours.
-r Use with the
-a
or
-x
parameter to specify the name of a
management station. The name of a management station
can be either direct_sa (out-of-band storage array) or
host_sa (in-band storage arrays [host-agent]). The
-r
parameter enables you to set or change the alert
notifications for all storage arrays under each
management station.
-S (uppercase) Use to suppress the informational messages describing
command progress that appear when running script
commands. (Suppressing informational messages is also
called
silent mode
.) This parameter suppresses the
following messages:
• Performance syntax check
• Syntax check complete
• Executing script
• Script execution complete
• SMcli completed successfully
-s (lowercase) Use with the
-d
parameter to display the alert settings in
the configuration file.
-v Use with the
-d
parameter to display the current global
status of the known devices in the storage array
configuration file. (The configuration file lists all of the
devices in a storage array configuration and the
relationship between the devices. Use the configuration
file to reconstruct a storage array).
-X (uppercase) Use to delete a storage array from the configuration file.
(The configuration file lists all of the devices in a storage
17