Dell PowerVault DR4100 Скачать руководство пользователя страница 16

Страница: 16 / 122

Responding To Error Messages

If an error message is displayed while the system is booting, make a note of the message. For more information, see
System Error Messages.

NOTE: After installing a memory upgrade, it is normal for your system to display a message the first time you start
your system.

Using The System Setup Navigation Keys

Keys

Action

Up arrow

Moves to the previous field.

Down arrow

Moves to the next field.

<Enter>

Allows you to type in a value in the selected field (if applicable) or follow the link in the field.

Spacebar

Expands or collapses a drop-down list, if applicable.

<Tab>

Moves to the next focus area.

NOTE: For the standard graphics browser only.

<Esc>

Moves to the previous page until you view the main screen. Pressing <Esc>in the main screen
displays a message that prompts you to save any unsaved changes and restarts the system.

<F1>

Displays the System Setup help file.

NOTE: For most of the options, any changes that you make are recorded but do not take effect until you restart the
system.

System Setup Options

System Setup Main Screen

NOTE: Unified Extensible Firmware Interface (UEFI) Boot Manager is not supported. BIOS Boot Manager is the
default boot mode.

Menu Item

Description

System BIOS

This option is used to view and configure BIOS settings.

iDRAC Settings

This option is used to view and configure iDRAC settings.

Device Settings

This option is used to view and configure device settings.

System BIOS Screen

NOTE: The options for System Setup change based on the system configuration.

Содержание PowerVault DR4100



























































































































Результаты поиска

Содержание PowerVault DR4100

Отзывы:

Похожие инструкции для PowerVault DR4100

Бренды по названию

Популярные бренды

Dell PowerVault DR4100, Руководство пользователя

Результаты поиска

Содержание PowerVault DR4100

Отзывы:

Похожие инструкции для PowerVault DR4100

Бренды по названию

Популярные бренды