Installing the optional iDRAC port card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Keep the Phillips #2 screwdriver ready.
4.
Remove the cooling shroud.
5.
Remove the internal cooling fan.
Steps
1.
Align and insert the tabs on the iDRAC port card on the slots on the chassis wall.
2.
Insert the iDRAC port card into the connector on the system board.
3.
Tighten the screw to secure the iDRAC port card.
Next steps
1.
Reconnect all the cables to the iDRAC port card.
2.
Install the internal cooling fan.
3.
Install the cooling shroud.
4.
Follow the procedure listed in
After working inside your system
.
Related Tasks
Removing the cooling shroud
Removing the internal cooling fan
Installing the internal cooling fan
Installing the cooling shroud
Replacing an optional SD vFlash card
1.
Locate the SD vFlash card slot at the back of the chassis.
2.
To remove the SD vFlash card, push the SD vFlash card inward to release it, and pull the SD vFlash
card from the SD vFlash card slot.
96
Содержание poweredge t330
Страница 1: ...Dell PowerEdge T330 Owner s Manual Regulatory Model E35S Series Regulatory Type E35S001 ...
Страница 104: ...Figure 40 Opening and closing the processor shield 1 processor shield 2 tab on the processor shield 3 socket lever 104 ...
Страница 132: ...Figure 56 Removing and installing the screws on the system board 1 screw 8 132 ...
