Steps
1.
Using a screwdriver, push the release tabs on the corners of the blank from inside the system, to
unlock the four-slot hard drive blank from the chassis.
2.
From the front of the system, pull the four-slot hard drive blank at the corners until it is free of the
hard drive slot.
Figure 28. Installing and removing the four-slot hard drive blank
1.
four-slot hard drive blank
2. release tab (4)
3. screwdriver
Next steps
1.
Install the four-slot hard drive blank.
2.
Follow the procedure listed in
After working inside your system
.
Related Tasks
Removing the cooling shroud
Removing a hot swappable hard drive from a hard drive carrier
Removing the hard drive backplane
Installing a four-slot hard drive blank
Installing a four-slot hard drive blank
Prerequisites
1.
Ensure that you follow the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
80
Содержание poweredge t330
Страница 1: ...Dell PowerEdge T330 Owner s Manual Regulatory Model E35S Series Regulatory Type E35S001 ...
Страница 104: ...Figure 40 Opening and closing the processor shield 1 processor shield 2 tab on the processor shield 3 socket lever 104 ...
Страница 132: ...Figure 56 Removing and installing the screws on the system board 1 screw 8 132 ...
