Removing the internal cooling fan
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: Never operate your system with the internal cooling fan removed. The system can
overheat and result in shutdown of the system and loss of data.
CAUTION: Do not operate the system with the cover removed for a duration exceeding 5
minutes.
1.
Ensure that you follow the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Remove the cooling shroud.
Steps
1.
Disconnect the internal cooling fan power cable from the system board.
2.
Holding the internal cooling fan, press the release tab, and slide the cooling fan out in the direction
of the arrow marked on the fan.
CAUTION: Do not remove or install the internal cooling fan by holding the fan blades.
87
Содержание poweredge t330
Страница 1: ...Dell PowerEdge T330 Owner s Manual Regulatory Model E35S Series Regulatory Type E35S001 ...
Страница 104: ...Figure 40 Opening and closing the processor shield 1 processor shield 2 tab on the processor shield 3 socket lever 104 ...
Страница 132: ...Figure 56 Removing and installing the screws on the system board 1 screw 8 132 ...
