Figure 12. Removing and installing caster wheels
1.
support unit
2. screw for support unit (2)
3. slot on base of the tower (4)
4. wheel assembly unit (2)
5. screw for wheel assembly (2)
Related Tasks
Removing the system feet
Removing caster wheels
Removing caster wheels
Prerequisites
1.
Ensure that you follow the
Safety instructions
.
2.
Keep the Phillips #2 screwdriver ready.
3.
Place the system on a flat and stable surface with the wheels extending beyond the edge of the
surface.
Steps
1.
Remove the screw that secures the front wheel unit to the base of the chassis.
2.
Slide the front wheel unit slightly to the back of the system to release the retention hooks, and pull
the front wheel unit.
3.
Remove the screw securing the back wheel unit to the base of the chassis.
4.
Slide the back wheel unit slightly to the front of the system to release the retention hooks, and pull
the back wheel unit.
55
Содержание poweredge t330
Страница 1: ...Dell PowerEdge T330 Owner s Manual Regulatory Model E35S Series Regulatory Type E35S001 ...
Страница 104: ...Figure 40 Opening and closing the processor shield 1 processor shield 2 tab on the processor shield 3 socket lever 104 ...
Страница 132: ...Figure 56 Removing and installing the screws on the system board 1 screw 8 132 ...
