Steps
1.
Align the tabs on the system feet with the slots on the base of the chassis.
2.
Secure the system feet to the base of the chassis by using the screws.
Next steps
Place the system upright on a flat and stable surface, and turn the system feet outward.
Related Tasks
Removing the system feet
Caster wheels (optional)—tower mode
Caster wheels provide mobility to the system in the tower mode.
The caster wheel assembly consists of:
• Caster wheel units (front and back)
• Two screws for the caster wheel units
Installing caster wheels
Prerequisites
1.
Ensure that you follow the
Safety instructions
.
2.
Keep the Phillips #2 screwdriver ready.
3.
Place the system on its side on a flat and stable surface with the base of the system extending off the
edge of the surface.
4.
If installed, remove the system feet.
Steps
1.
Align the retention hooks on the back wheel unit with the slots on the base of the chassis, and insert
the hooks into the slots.
2.
Slide the back wheel to the back of the system and secure the unit in place using a screw.
3.
Align the retention hooks on the front wheel with the slots on the base of the chassis, and insert the
hooks into the slots.
4.
Slide the front wheel to the front of the system, and secure the unit in place using a screw.
54
Содержание poweredge t330
Страница 1: ...Dell PowerEdge T330 Owner s Manual Regulatory Model E35S Series Regulatory Type E35S001 ...
Страница 104: ...Figure 40 Opening and closing the processor shield 1 processor shield 2 tab on the processor shield 3 socket lever 104 ...
Страница 132: ...Figure 56 Removing and installing the screws on the system board 1 screw 8 132 ...
