Dell PowerEdge R900, Руководство владельца оборудования

Страница: 179 / 190

Glossary
179
RAID —
Redundant array of independent disks. A method of providing data
redundancy. Some common implementations of RAID include RAID 0, RAID 1, RAID
5, RAID 10, and RAID 50. See also guarding, mirroring, and striping.
RAM — Random-access memory. The system’s primary temporary storage area for
program instructions and data. Any information stored in RAM is lost when you turn
off your system.
RAS — Remote Access Service. This service allows users running the Windows
operating system to remotely access a network from their system using a modem.
RE AD M E F I L E
— A text file, usually shipped with software or hardware, that contains
information supplementing or updating the product’s documentation.
RE AD
-
O N L Y F I L E
— A read-only file is one that you are prohibited from editing or
deleting.
ROM — Read-only memory. Your system contains some programs essential to its
operation in ROM code. A ROM chip retains its contents even after you turn off your
system. Examples of code in ROM include the program that initiates your system’s
boot routine and the POST.
ROMB —
RAID on motherboard.
RP M
— Revolutions per minute.
RTC — Real-time clock.
SAS — Serial-attached SCSI.
SATA — Serial Advanced Technology Attachment. A standard interface between the
system board and storage devices.
SCSI — Small computer system interface. An I/O bus interface with faster data
transmission rates than standard ports.
SDRAM — Synchronous dynamic random-access memory.
SE C
— Second(s).
SE R I AL P O RT
— An I/O port used most often to connect a modem to your system.
You can usually identify a serial port on your system by its 9-pin connector.
SE R V I CE T A G
—
A bar code label on the system used to identify it when you call Dell
for technical support.
SI MP LE D I S K VOL U M E
—
The volume of free space on a single dynamic, physical
disk.
SMART — Self-Monitoring Analysis and Reporting Technology. Allows hard drives
to report errors and failures to the system BIOS and then display an error message on
the screen.