Dell PowerEdge R900, Руководство владельца оборудования

Страница: 145 / 190

Troubleshooting Your System
145
7 Ensure that the controller card is firmly seated in its connector. See "SAS
Controller Card" on page 78.
8 If you have a SAS RAID controller card, ensure that the following RAID
components are properly installed and connected:
• Memory module
• Battery
9
Verify that the cable connections between the SAS backplane(s) and the
SAS controller card are correct. See "Installing an SAS Controller Card" on
page 80.
10 Ensure that the cables are firmly connected to the SAS controller card and
the SAS backplane.
11 Close the system. See "Installing the Top Cover" on page 60.
12 Reconnect the system to its electrical outlet, and turn on the system and
attached peripherals. If the problem persists, proceed as follows:
• If you have a SAS controller card, see "Getting Help" on page 165.
• If you have a SAS RAID controller card, replace the SAS RAID card
battery. See "Installing a RAID Battery" on page 84. If replacing the
battery does not solve the problem, see "Getting Help" on page 165.
Troubleshooting Expansion Cards
NOTE:
When troubleshooting an expansion card, see the documentation for your
operating system and the expansion card.
Problem
• Error message indicates a problem with an expansion card.
• Expansion card performs incorrectly or not at all.
Action
CAUTION:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before performing any
procedure, see your Product Information Guide for complete information about
safety precautions, working inside the computer and protecting against
electrostatic discharge.