Figure 39. Installing the PSU blank
1.
PSU blank
2.
PSU bay
Related links
Safety instructions
Removing the power supply unit blank
Removing an AC power supply unit
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
CAUTION: The system needs one power supply unit (PSU) for normal operation. On power-redundant systems, remove
and replace only one PSU at a time in a system that is powered on.
If applicable, unlatch and lift the optional cable management arm if it interferes with the power supply unit (PSU) removal. For
information about the cable management arm, see the system’s rack documentation.
Follow the safety guidelines listed in the Safety instructions section.
Steps
1.
Disconnect the power cable from the power source and from the PSU you intend to remove, and then remove the cables from
the strap.
2.
Press the release latch and slide the PSU out of the chassis by using the PSU handle.
96
