Steps
1.
Locate the TPM connector on the system board.
NOTE: To locate the TPM connector on the system board, see the System board connectors section.
2.
Align the edge connectors on the TPM with the slot on the TPM connector.
3.
Insert the TPM into the TPM connector such that the plastic rivet aligns with the slot on the system board.
4.
Press the plastic rivet until the rivet snaps into place.
Figure 95. Installing the TPM
1.
rivet slot on the system board
2.
plastic rivet
3.
TPM
4.
TPM connector
Next steps
1.
Install the system board.
2.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the system board
After working inside your system
Initializing the TPM for BitLocker users
Initialize the TPM.
For more information about initializing the TPM, see
http://technet.microsoft.com/en-us/library/cc753140.aspx
.
The
TPM Status
changes to
Enabled, Activated
.
Initializing the TPM for TXT users
1.
While booting your system, press F2 to enter System Setup.
2.
On the
System Setup Main Menu
screen, click
System BIOS
→
System Security Settings
.
3.
From the
TPM Security
option, select
On with Pre-boot Measurements
.
4.
From the
TPM Command
option, select
Activate
.
5.
Save the settings.
6.
Restart your system.
7.
Enter
System Setup
again.
8.
On the
System Setup Main Menu
screen, click
System BIOS
→
System Security Settings
.
9.
From the
Intel TXT
option, select
On
.
154