Install the rails in the cabinet
This task describes the procedure to install one rail. After installing one rail, repeat the procedure for the other rail. The
procedure is the same for both the left and right rail. You can install the rails into either a square or round hole rack.
Steps
1. Position the rail end piece so the label FRONT is located at the front of the rack and facing towards the inside of the rack,
while orienting the rear of the rail to align level with the holes on the rear of the rack.
2. From the rear of the rack, pull the rail straight back until the latch is locked.
3. To install the front end piece of the rail, press the blue latch release button until the latch rotates open.
4. Pull the rail forward until the pins slide into the holes on the front of the rack, then release the latch to secure the rail in
place.
Figure 13. Installing the rails
5. Repeat for the other rail.
Install the expansion enclosure on the rails
Steps
1. With help from another person, lift the expansion enclosure and, from the front of the rack, slide the expansion enclosure
onto the rails.
2. Push the expansion enclosure into the rack until the slam latches engage and lock the system into the rack.
Install a new base enclosure and optional expansion enclosure
21
